Information about house framing tips and framing basics.
House Framing Tips
Do you get tensed thinking about the work involved in the framing of your new house? The very thought of something going wrong while framing the house is pretty scary, since once framing begins the work will only increase with every progress made. It may seem to be a herculean task, but if you are well organised and have a plan in mind, framing can take place quite swiftly. The most obvious way of making the task of framing a house simple is by being organised. It is essential to pre-plan the entire exercise and keep a track of the transactions and purchases made when meeting framing requirements. All the material required for the purpose, all the tools, the correct man power and the right technology and plan should be ready before the commencement of the project. Mentioned below are some other essential house framing tips that if followed will help make work a lot simpler:
House Framing Basics
- It is advisable to get all the material required for framing a house delivered on time. If there is delay in the supplies, the framing will take much longer which will only delay the whole process.
- It is logical and time saving to mark the locations of the walls, windows and doors before starting the layout process. These chalk lines will help you visualize and check the layout project before provisions for walls are made. These markings can also serve as guidelines while raising walls.
- You can save a lot of time by pre-building and pre-cutting as many parts as possible. For instance you can cut and keep ready all your window trimmer studs and can also nail them to the king studs. This will help you save time by simply dropping the pre-nailed trimmer while setting up a wall with a window in it.
- It is advisable to order for the required quantity or number of trusses, windows and doors and also to apply for a gas meter. This will speed up your framing process and your house will be ready with all the required supplies.
- When framing the house you can afford to make any alterations, if necessary. Once the framing process is over, trying to make any alteration will not only be messy, but will also prove to be expensive.
- If it is a contractor you are hiring to frame your house, make sure that you get the best possible deal. There are many contractors offering different framing packages. List down your requirements, make it clear to the contractor and see to it that the work done gives you value for your money.
- A crane can prove handy when the framers are ready to fix the trusses. With the help of a crane you can easily lift the trusses to the roof and secure it without much difficulty.
- It is better to fix or place large items like bath tubs during the framing process, since it won't be easy to do so after the framing is done. Therefore, you need to ensure that these items are there when needed most.
- If you are planning on installing a heating system, it should be done before the plumbing work begins. It is so because a plumber can work even after the heating system is installed but you cannot install the system after all the plumbing work is done with.
- In order to make the work easier for the plumber, mark out space for the cabinets. Markings can actually help a plumber perform his duties that much more easily.
- It is not mandatory to inspect the heating installations. However, you will have to take care of the pipes and see that they do not squeak.
- It is important for the roof vents to be installed before you start working on the roof. The roofers will install vents for the ventilation of the attic.
- Make it a point to guide the electrician through the house, showing him the places at which you wish the outlets to be placed. Briefing the electrician personally will reduce the chances of any mistakes.
- Though it is not necessary to get plumbing, heating and other essential aspects of your house verified and inspected, it is advisable to do so since safety matters most.